Designed for flow efficiency, ease of install and rapid deployment, the Elkhart Brass standpipe valves offer the reliability and versatility required for modern high-rise and standpipe fire protection applications. These valves have major global and regional certifications in UL, FM and City of New York approval and comply with NFPA 14 requirements.

UL Listed FM Approved

URFA Field Adjustable Pressure Reducing Valves

The Elkhart Brass URFA™ field adjustable pressure reducing valve (PRV) is the original fire ground adjustable valve used worldwide. It provides firefighters the ability to easily adjust valve outlet pressure to ensure adequate reach, safety of the firefighter, and efficient attack and extinguishing of fire. The URFA valve design incorporates the flexibility and reliability required by modern high-rise sprinkler systems and standpipe fire protection applications. The URFA valves are UL Listed and City of New York Fire Department approved.

  • Support up to 400 psi (27.6 BAR) inlet pressure under both flow and static conditions
  • Easy to operate with less than 15 ft/lbs to open/close or adjust pressure setting
  • Gauge taps for ease of pressure gauge install, and supervisory switch for tamper proofing
  • 2.5″ FNPT inlet
  • 2.5″ FNPT and NHT outlet
  • Angle and straight valve options

UR Factory Set Pressure Reducing Valves

The Elkhart Brass UR factory set pressure reducing valve is designed to operate automatically via inner hydraulic controls without diaphragms, springs or outside control mechanism. The action of the pressure reducing valve is completely dependent on the conditions at the nozzle or sprinkler system. The UR valves are UL Listed.

  • Support up to 400 psi (27.6 BAR) inlet pressure under both flow and static conditions
  • Most flow efficient of its class supporting up to 500 GPM (1900 LPM) flow rate
  • Brass construction allows for use in corrosive and non-corrosive environment applications
  • 1.5″ and 2.5″ FNPT inlet
  • 1.5″ and 2.5″ FNPT and NHT outlet

UP Pressure Restricting Valves

The Elkhart Brass UP pressure restricting valves design enables a range of valve outlet pressures adjustment under flowing condition. The UP valves are both factory and field settable and are available in 1.5″ and 2.5″ inlet/outlet sizes and offered in angle style with NPT and NHT threading options. The UP valves are UL Listed and FM Approved.

  • Compact size enables ease of installation
  • Support up to 400 psi (27.5 BAR) static and dynamic pressure
  • Supports up to 500 GPM (1900 LPM) flow rate
  • Brass and bronze construction enable use in corrosive and non-corrosive environment
  • 1.5″ and 2.5″ FNPT inlet
  • 1.5″ and 2.5″ FNPT and NHT outlet

 

U Angle Hose Valves

The Elkhart Brass U angle valves are used in firefighting piping systems as Fire Department outlet connection or Fire Hose Rack assembly connection. They are available in 1.5″ and 2.5″ inlet/outlet sizes and offered in angle style with NPT and NHT threading options. The U valves are UL Listed and FM Approved.

  • Compact size enables ease of installation
  • Support up to 300 psi (20.6 BAR) static and dynamic pressure
  • Supports up to 500 GPM (1900 LPM) flow rate
  • Brass and bronze construction enable use in corrosive and non-corrosive environment
  • 1.5″ and 2.5″ FNPT inlet
  • 1.5″ and 2.5″ FNPT and NHT outlet