Tee Handle Remote Control Units

Push-pull control for the operation of in-line, quarter-turn ball valves or built-in eductors. Handle configuration allows identification/location label to be inserted.

RC-1

  • Locking handle
  • 1.9″ Installation diameter (4.8 cm)
  • Furnished with two ball joint connectors
  • 11″ Travel (27.9 cm)
  • Chrome-plated case, brass handle with anodized aluminum extrusion rod

RC-7

  • Non-locking handle
  • 1″ Installation diameter (2.5 cm)
  • Specify 11.3″, 9.8″, or 7.3″ Travel
  • Chrome-plated case, brass handle with anodized aluminum extrusion rod

RC-10 – Slow Closing Valve Control

  • Remote actuation of any ball valve
  • Linear output screw-type actuator compliant with NFPA 1901 (as it pertains to slow-closing valves)
  • Actuator and push-rod constructed of extruded aluminum alloys
  • Precision needle thrust bearing and hardened thrust washers
  • 5″ cast alloy handwheel with collet-type connection allows for easy compact thru-panel installation (either new or retrofit)
  • Furnished with threaded ball swivel joint at end of drive rod
  • Installation diameter: 1.03″ (pump panel) (2.6 cm)
  • Length: 16.4″ (retracted) and 21.4″ (extended) (41.6 cm or 54.3 cm)

Optional Valve Status Indicator

  • For use with RC-10 – Slow closing valve control handle
  • Requires minimal pump panel space
  • Tri-color indicators: red (closed), yellow (gated) and green (open)
  • Feature 100,000-hour, ultra-bright LEDs mounted within an optical filter to maximize visibility in bright sunlight
  • NEMA 4 rated
  • Chrome bezel included

RC Accessories

775-5 – Handle

  • For remote control screw-type gate valve or gear-driven valve
  • Bored for .375″ rod (0.95 cm)
  • Material: Cast brass with chrome-plated finish
  • Diameter: 4″ (10.1 cm)

775-11 – Rod Guide

  • For centering and guiding remote control rod
  • Nylon sleeve for 0.5″ rod (1.2 cm)
  • Material: Cast brass with chrome-plated finish
  • Diameter: 1.5″ (3.8 cm)

775-15 – Tee Handle

  • For use with push-pull rods to remotely operate in-line, quarter-turn ball valves or built-in eductors
  • Bored for 0.5″ rod (1.2 cm)
  • Can be threaded to .500″ — 13 or .500″ — 20 (specify)
  • Handle configuration allows identification/location label to be inserted
  • Material: Cast brass with chrome-plated finish
  • Height: 1.1″ (2.7 cm)
[doc_library doc_category=”drawings-models-remote-valve-controls” widths=”25,50,10,15″ auto_width=”false” priorities=”1,3,4,2″ column_breakpoints=”all,desktop,none,all” responsive_display=”child_row_visible”]
[doc_library doc_category=”manuals-remote-valve-controls” widths=”25,50,10,15″ auto_width=”false” priorities=”1,3,4,2″ column_breakpoints=”all,desktop,none,all” responsive_display=”child_row_visible”]
[doc_library doc_category=”brochure-remote-valve-controls” widths=”25,50,10,15″ auto_width=”false” priorities=”1,3,4,2″ column_breakpoints=”all,desktop,none,all” responsive_display=”child_row_visible”]